HP 15 Manual Rev A Page 1 of 1 Operations Manual HP15 Self-Heated Oxygen Measurement and Control System Please read, understand, and follow t
HP 15 Manual Rev A Page 10 of 10 Pump Control This screen will allow the user to manually turn the pump on or off. Press the On button to turn the
HP 15 Manual Rev A Page 11 of 11 default values for that type, certain settings may be lost. When the PVT type is changed, the user will have to c
HP 15 Manual Rev A Page 12 of 12 Loop PID Settings – Page 2 From this screen, the user can modify the control loop output, integral preset, control
HP 15 Manual Rev A Page 13 of 13 60 % 50 % 40 % 30 % 20 % Press the button for the desired setpoint change limit. The <<< More butto
HP 15 Manual Rev A Page 14 of 14 Type NNM Type R Type S Type T 2.5 Volts 1.25 Volts 78.125 mV 19.53125 mV 4-20 mA 25 Volts 12.5 Volts 7
HP 15 Manual Rev A Page 15 of 15 Analog Output Setup This screen will allow the user to set up the analog output settings for output 1 or 2. To ch
HP 15 Manual Rev A Page 16 of 16 the source. This will display ten buttons from which the user can select the alarm source: PV1 PV2 PV3 Input 1 In
HP 15 Manual Rev A Page 17 of 17 Alarm Settings – Page 3 This screen will allow the user to set the hysteresis and the on delay time for the alarm
HP 15 Manual Rev A Page 18 of 18 Spare Parts List 31125 24 Volt / 1.2 Amp Power Supply 13454 Series 9120 Controller 31292 Operator Interface - T
HP 15 Manual Rev A Page 19 of 19 Appendix 1 – Factory Defaults Universal Defaults • Temperature in °F • All Baud Rates initially 19200 and set fo
HP 15 Manual Rev A Page 2 of 2 Table of Contents Table of Contents...
HP 15 Manual Rev A Page 20 of 20 • Alarm 2 hysteresis is set for 1 • Alarm 3 setpoint set for 2000 • Alarm 3 is set for process variable 2 • Al
HP 15 Manual Rev A Page 21 of 21 • Process variable 2 is temperature • Process variable 3 is temperature • Analog output 1 offset is 0 • Analog
HP 15 Manual Rev A Page 22 of 22 • Analog output 1 range is 200 • First process control low limit is –100 • First process control high limit is
HP 15 Manual Rev A Page 23 of 23 Revision History Rev. Description Date MCO # - Initial Release 06/14/07 N/A A Updated logo on title page; Chan
HP 15 Manual Rev A Page 3 of 3 General Information The HP15 system includes two main enclosures. The first contains the heater and the Gold Probe
HP 15 Manual Rev A Page 4 of 4 Electrical Connections Insert the probe into the coupling at the base of the large box. It is important that the pr
HP 15 Manual Rev A Page 5 of 5 Inside Electrical Enclosure;6.0 AMP;6 Amp Circuit Breaker;1000;Incoming Customer 110VAC (Line);;Incoming Customer 11
HP 15 Manual Rev A Page 6 of 6 1. Connect incom ing 120VAC to the Electrical Enclosure:110 VAC Line Term inal 1000110 VAC Neutral Term inal 10021
HP 15 Manual Rev A Page 7 of 7 Plumbing Connections The sample gas can be transported from the sample port on the furnace to the bottom of the exte
HP 15 Manual Rev A Page 8 of 8 HP 15 Screens Initial Screen The first screen to be displayed when the HP is powered up is the initial screen, which
HP 15 Manual Rev A Page 9 of 9 will be used. To change the hysteresis, click on the Hysteresis button and enter the new hysteresis value from the
Comments to this Manuals